If you can't open it, you don't own it: a Maker's Bill of Rights to accessible, extensive, and repairable hardware.
By Mister Jalopy (he rocks!)
See his garage at http://eecue.com/log_archive/eecue-log-781-Mister_Jalopy___Dorkbot_Socal_Shop_Tour.html
Via: http://www.makezine.com/04/ownyourown/
By Mister Jalopy (he rocks!)
- Meaningful and specific parts lists shall be included.Cases shall be easy to open.
- Batteries should be replaceable.
- Special tools are allowed only for darn good reasons.
- Profiting by selling expensive special tools is wrong and not making special tools available is even worse.
- Torx is OK; tamperproof is rarely OK.
- Components, not entire sub-assemblies, shall be replaceable.
- Consumables, like fuses and filters, shall be easy to access.
- Circuit boards shall be commented.
- Power from USB is good; power from proprietary power adapters is bad.
- Standard connecters shall have pinouts defined.
- If it snaps shut, it shall snap open.
- Screws better than glues.
- Docs and drivers shall have permalinks and shall reside for all perpetuity at archive.org.
- Ease of repair shall be a design ideal, not an afterthought.
- Metric or standard, not both.
- Schematics shall be included.
See his garage at http://eecue.com/log_archive/eecue-log-781-Mister_Jalopy___Dorkbot_Socal_Shop_Tour.html
Via: http://www.makezine.com/04/ownyourown/
0 comments:
Post a Comment